Program

8:30 am – 9:00 am

53 Fatigue Performance Study of 316L Stainless Steel Specimens Fabricated by Selective Laser Melting

124 Material mechanisms of the nanostructured metallic multilayer post-weld treatment for fatigue strength increase

46 Determination of fatigue effective notch stresses based on the real weld geometry considering effects of welding imperfections

4 Updated Guidelines on HFMI Treatment for Enhancing Fatigue Strength in Welded Joints: IIW 2nd Edition

119 On the Use of Hollow Specimen to Characterize the Fatigue Crack Growth in High Pressure Hydrogen Gas

9:00 am – 9:30 am

96 Characterization of Defects in Components Produced by Wire-Laser Additive Manufacturing Applied to Low-Alloy Steel

33 Methodological Tools for Engineers: How to Assess the Relevance of Using a Uniaxial Fatigue Life Assessment With Eurocode 3 or Multiaxial Fatigue Life Assessment With a Dang Van-Type Criterion? Application to Mechanical Parts of Cableway Installations

24 Fatigue Strength Improvement by Machining Process in Stainless Steel Welds

13 Life extension using HFMI of notched and prefatigued welded bridge details

70 Experimental investigation of the environmentally assisted fatigue crack initiation mechanisms in austenitic stainless steel 304L

9:30 am – 10:00 am

15 Fatigue performance of a titanium component produced by laser powder bed fusion

2 Experimental and numerical investigations on the fatigue behaviour of intermittent rail welds of crane runway beams

41 Fatigue life modeling of steel cords under complex loads

14 Experimental study on the influence of thinness effect and weld quality of non- load carrying welded joints

102 Hydrogen effect on the self-heating response under cyclic loading of R5 and R6 HSS used for offshore mooring chains

10:45 am – 11:15 am

57 Evaluation of the Influence of Weld Surface Seam Geometry on Fatigue Strength Prediction using a Data-driven Fatigue Assessment Method

12 Fatigue tests of austenitic stainless steel AISI 321 and the weld metal ER 308L in air and high temperature water environment

130 Fatigue life assessment of cold-formed ultra-high strength steel sections

39 Optimizing Welded Structures: A Study on the Integration of Recent Technological Development

87 Probabilistic Fatigue Approach for Complex Vibration Signals. Case Study of Automotive components.

11:15 am – 11:45 am

128 Defect generation based on micro-computed X-ray tomography and generative neural network: application to cast aluminium and additively stainless steel

18 High temperature fatigue behavior of a new PBF-LB/M VDM® 780 alloy

136 Effect of prior plastic deformation on the fatigue behavior of a high strength martensitic steel

35 Introducing Superelements for Weld Fatigue Analysis

10 Improving fatigue life assessment of scanned nuclear grade weld topologies using elastic-plastic FEA and advanced gradient based fatigue damage parameters

11:45 am – 12:15 pm

60 Principle strategies for the fatigue assessment of steels based on machine learning approaches

120 Thermo-mechanical fatigue crack growth of a coated superalloy

55 Identification of Plastic Properties in Multi-Material Thin Aluminum Welded Tubes through Experimental Methods, Modeling, and AI

42 Fatigue strength verification of bearing type joints with mechanical fasteners – A comparison of Eurocode 3 and effective notch stress concept

104 An extension of Active Kriging for Sequential Models to fatigue-loaded Systems under multiple load configurations

1:30 pm – 2:00 pm

74 Dominant Microstructural Factors Contributing to Inferior Fatigue Resistance in Additively Manufactured Ni-Based Superalloy 718

159 Effect of seawater on the fretting fatigue endurance of crossed steel wires : application to floating offshore wind turbines mooring line

91 A Study on Forward and Reverse Methods for the Evaluation of S-N curves

118 Results of the Jaco project: Effect of in-plane and out-of-plane loading on the cracking behaviour of tubular joints during large-scale tests

72 Influence of defects detected by penetrant testing on fatigue properties in cast material for marine propellers

2:00 pm – 2:30 pm

86 Fatigue behavior of Aluminum DED material joined to a plate in load carrying and non-load carrying configurations

107 Effect of temperature and hydrogen on fatigue properties of austenitic stainless steel

58 Fatigue strength assessment of large bolting assemblies using the notch-strain approach

106 Experimental and numerical study on the effect of interference on shrink-fitted assemblies under fretting-fatigue solicitations

73 Investigation of Laser Shock Peening and Conventional Shot Peening on the Fatigue Crack Growth Rate of Aluminium 2024 T4 Alloy

2:30 pm – 3:00 pm

56 Evaluation of high-cycle fatigue properties of additively manufactured SS316L via self-heating method

126 Effect of hydrogen gas precharging on the mechanical properties and Fatigue life of Inconel 718 obtained by L-PBF homogenised and aged: From room to intermediate temperature

63 Characterization and modeling of the impact of micro-shrinkage porosity on the high cycle fatigue resistance of cast G20Mn5 steel

45 The Peak Stress Method combined with shell finite element models for the fatigue design of complex welded structures

92 Monitoring the Mechanical Environment Harshness and Assessing the Remaining Life of Sensitive Equipment

3:00 pm – 3:30 pm

139 Surface and Bulk Defects Influence in Fatigue of Additively Manufactured Ti-6Al-4V Alloys: a Unified Approach for Design Purposes

22 Balancing Recovery Stress and Structural Fatigue Behavior in Iron-based Shape Memory Alloys: New Insights for Construction Applications

115 Evolving internal length scales during fatigue crack growth : Insights from statistical fractography and implications for fatigue design

88 Fatigue Tests on Butt-Welded Connections With Imperfections

8 Non-local continuum damage mechanics-based crack growth modelling for high- performing steel structures

4:00 pm – 4:15 pm

BEST POSTER AWARD

4:15 pm – 5:00 pm

160 Advances in understanding cyclic crack initiation mechanisms in f.c.c. alloys: influence of plastic strain localization and hydrogen

5:00 pm – 5:45 pm

152 Tomorrow’s World: Fatigue and Reliability Qualification in the Green Economy