Poster Session
A poster award will be attributed by a jury for the best poster presentation with a special prize.
The award ceremony will be held on thursday 20 at 4.00 pm in Room 6.
-
14
Experimental study on the influence of thinness effect and weld quality of non-load carrying welded joints
-
17
Experimental investigation of the preloading effect on S960 non-load carrying circular flat studs
-
20
Effect of blast-cleaning on the fatigue strength of welded and non-welded constructional details
-
32
Assessment of Weld Quality and Stress Concentrations in Laser Hybrid Welded Butt Joints Using 3D Scanning and Reverse Engineering
-
54
S-N Performance of Horizontally Built LPBF Ti6Al4V Fatigue Samples: Effect of Support Structures and Direction Dependent Surface Textures
-
59
Assessment of stress concentration factors of welded joints based on 2D- and 3D-reverse engineering
-
62
‘Total-Life’ method: achieving accurate fatigue life predictions by combining strain-life and fracture mechanics
-
68
Fatigue life assessment of dissimilar and homogeneous LPBF AISI 316 L butt welded joints
-
75
Effect of Phosphorus Content on Fatigue Crack Acceleration in Martensitic Steel under High-Pressure Hydrogen Gas
-
77
Effect of waveform on fatigue crack growth behavior of pipeline steel X60 in high-pressure hydrogen gas
-
83
Effect of loading waveforms on fatigue crack growth in pipeline steel in high pressure hydrogen gas
-
93
Contribution of thermometry for the study of metal structures with process induced defects in high cycle fatigue
-
98
Effect of Temperature and Hydrogen Coupling on the Fatigue Behaviour of an Austenitic Steel Used for Bolts at Low Temperatures
-
100
Infl uence of the load ratio (R) on the fatigue limit of Inconel 718 DA in presence of artificial defect
-
117
Influence of low temperature on the high cycle fatigue of austenitic steels under ratcheting conditions
-
123
Significant improvement of the fatigue performance of ER70S-6 WAAM un-milled structures: A Cu/Ni multilayer nanotechnology approach
-
125
Merging Nano and Macro Structure Design: Opportunities for the Structural Integrity of Steel Infrastructure
-
132
Microstructure degradation in the Silchrome 1 steel by high temperature VHCF: a case study
-
155
On the Role of Hydrogen in Plasticity Mechanisms Associated with Cyclic Creep of a 304L austenitic stainless steel
-
156
The very high cycle fatigue behaviour of case-carburised steel for gear applications using vibration-based testing
